2014/1/11

what's up Percent Variables,帶變數到email內



在what's up 裡面,能夠email 通知使用者有什麼錯誤
能夠帶一些相關參數,統稱Percent Variables ,列表如下


 
Percent Variables
You can customize an action's message by adding any of the variables in the following table.
Note: We do not recommend that you use percent variables in script text (Active Script Action), because they may resolve to text containing special characters (' ' (quotes), " " (double-quotes), % (percent), new line characters, and the like) that may break your script.
Active Monitor Variables
Description
%ActiveMonitor.Argument
SNMP instance number. This is only used when an action is associated directly with an active monitor, and not the device as a whole.
%ActiveMonitor.Comment
The human readable name that coincides with the network switch. This is only used when an action is associated directly with an active monitor, and not the device as a whole.
%ActiveMonitor.Name

The name of the active monitor that fired an action. This is only used when an action is associated directly with an active monitor, and not the device as a whole.
%ActiveMonitor.NetworkInterfaceAddress
IP address for the network interface. This is only used when an action is associated directly with an active monitor, and not the device as a whole.
%ActiveMonitor.Payload
The payload returned by a WMI, Exchange, SQL, SNMP or Active Script active monitor. This is only used when an action is associated directly with an active monitor and not the devices as a whole.
For Active Script Active Monitors, the payload is the text that is passed to the SetResult() method in the script.
%ActiveMonitor.State

The Current status of the monitor, such as "Down at least 5 min." This is only used when an action is associated directly with an active monitor, and not the device as a whole.

Device Variables
Description
%Device.ActiveMonitorDownNames
List of down services using the abbreviated name if available.
%Device.ActiveMonitorUpNames
Full service names of all UP monitored services on a device.
%Device.Address
IP address (from device properties).
%Device.Attribute.[Attribute Name]
Returns an attribute from the SNMP information available for the device, such as the Contact name. To specify the attribute, append the category name (listed below) to the end of the variable. For example: %Device.Attribute.Contact, returns the contact name.
Default categories:
 *. Returns all attributes
 Info1. Upgrade path from v8
 Info2. Upgrade path from v8
Contact. Contact information from SNMP
 Location. Location information from SNMP
Description. Description information from SNMP
Custom. If you have created a custom attribute you can use the name of that custom attribute in the percent variable.
Example:
%Device.Attribute.Phone
%Device.Attribute.RackPosition
To avoid an error, always place a space or line break after the attribute name.  
%Device.DatabaseID
Returns the database ID of a device.
%Device.DisplayName
Display Name (from General of device properties)
%Device.HostName
Host Name (from General of device properties)
%Device.Notes
Notes. (Notes are from the device properties Notes)
%Device.SNMPOid
SNMP Object identifier.
%Device.State
The state's description (such as "Down at least 2 min" or "Up at least 5 min")
%Device.Status
This shows the name of the active monitor, preceded by the device state id : 10|DNS
%Device.Type
Device Type (from General of device properties)

Passive Monitor Variables
Description
%PassiveMonitor.DisplayName
The name of the monitor as it appears in the Passive Monitor Library.
%PassiveMonitor.LoggedText
Detailed Event description. (SNMP traps - Returns the full SNMP trap text.) (Windows Log Entries - Returns information contained in the Windows Event Log entries.) (Syslog Entries - Returns the text contained in the Syslog message.)
%PassiveMonitor.Payload.*
Payload generated by a passive monitor.
%PassiveMonitor.Payload.EventType
The type of passive monitor (Syslog, Windows Event, or SNMP Trap)
%PassiveMonitor.Payload.LogicalSource
Shows the device's logical IP address.
%PassiveMonitor.Payload.PhysicalSource
Shows the device's physical IP address.

System Variables
Description
%System.Date
The current system date. Configure the date format in Regional Options (from Program Options)
%System.DisplayNamesDownDevices
Display names of devices with down monitors
%System.DisplayNamesDownMonitors

Shows the name of a device and each monitor that is down on that device. The format of the response is 'device name':'monitor 1','monitor 2','...'
Example: ARNOR: FTP, HTTPS, Ping
%System.DisplayNamesUpDevices
Display names of up devices
%System.DisplayNamesUpMonitors
Shows the name of a device and each monitor that is up on that device. The format of the response is 'device name':'monitor 1','monitor 2','...'
Example: ARNOR: FTP, HTTPS, Ping
%System.InstallDir
Displays the directory on which WhatsUp Gold is installed
%System.NumberofDownDevices
Number of down devices on your network
%System.NumberOfDownMonitors
Shows the number of down monitors on your network
%System.NumberofUpDevices
Number of up devices on your network
%System.NumberOfUpMonitors
Shows the number of up monitors on your network
%System.Time
The current system  time. The format is hh:mm:ss

沒有留言:

windows 無法拖動文件

原因:未知 症狀:windows點任何文件,都無法拖動到其他地方  解決方式: 來源: https://answers.microsoft.com/en-us/windows/forum/all/drag-and-drop-stopped-working/b73e4938-ca2...